D'Angelico (used, 1947) New Yorker Special

Tag No 39-1511 Used

#1778, acoustic archtop, sunburst, non-cutaway, with original hard shell case

 

 And now for something entirely different:   We have never seen one of these before.    John D’Angelico, considered the finest independent guitar builder of the 20th Century, or at least for the first two-thirds of that century, made a keystone model that he called “New Yorker.”   This was an elaborately decorated instrument, made of the most select woods and built on a large platform (possibly because John was vertically challenged) measuring approximately 18” in body width. We believe that it is safe to say that nearly every professional jazz guitarist alive in the first two-thirds of the 20th century, whether they played a Gibson or an Epiphone, desired in their hearts to someday own a John D’Angelico guitar, and the best of those was the “New Yorker.”   The New Yorker had multi-ply headstock border (this one has 8-plies of black and crème, and so does the top, and so does the back), with ivoroid binding outermost.  It had three-ply bordered f-holes, white-black purfling under the fingerboard and also bordering on the front of the ebony ‘board.  it had the split-block fingerboard inlay and the hardware was gold plated.  It had the so-called Chrysler Building art deco headstock decoration above the nut (this is a pre-truss rod model D’Angelico so this decoration is inlaid).  It has the “D’Angelico, New York” script logo and banner above the 4th and 3rd tuners, in ivoroid, and below that, in mother of pearl, the long art-deco construction of 7 rectangular towers, then three blocks that are etched and blackened “New Yorker Special” and then four more decal blocks at the bottom.   This guitar was made with a “center dip” at the middle of the top of the headstock.  John used the famous pineapple and pediment design on some of his New Yorkers but not all.  Gruhn’s Guide to Vintage Guitars says that the center dip peghead shape continued to be used on some models at late as 1958.    

When John D’Angelico got a request for his top-of-the-line model in a somewhat smaller package, he built it in a 17” body width and called it a “New Yorker Special.” This guitar, however, is something of an anomaly.  This guitar says “New Yorker Special” on its headstock but in fact it is possible that it is a slightly less fanciful version of his famous “New Yorker” model.   First of all, instead of being 17” wide it is 18 3/8” wide like the full-fledged New Yorker.  This guitar was apparently ordered for Mr. Bach as a full size, but a hair more modest variation.   It has the split block fingerboard inlays which is correct for a New Yorker; it shows just the beginning of having some deterioration on the pickguard – which is celluloid and subject to such oxidation and even self-eradication (like the lemmings).   There is an old DeArmond “Guitar Mic” pickup in the case pocket and a rod has been installed on the bass side bottom of the fingerboard requiring 2 holes in the bass side of the board.  It has its original Grover tuners with a “target” on the back, and keystone shaped celluloid buttons; it retains its original ebony bridge with a pearl block on each side of the base, and its gold-plated “D’Angelico, New York” tailpiece.   The back and sides are made from birds-eye maple, and not from the tiger-stripe flamed maple that this builder would have used on a full-figured (no pun intended) “New Yorker” model.    There is finish checking – especially on back of headstock and neck, but elsewhere as well, and some of the finish is chipping around the crazing lines.

This guitar came in with a high action and it will be repaired at the hands of our most experienced and qualified D’Angelico expert, Leroy Aiello.  This repair may take some time, and so this guitar will probably not be ready for you to try it out before late spring/early summer 2012.  But if anybody reading this description would like to put a $100 “Right of First Refusal” deposit on it, to “hold” it for them we would be happy to accept your “ROFR” deposit.  This gives you the option to buy it, but you may choose not to buy it – so it is the best of all possible situations.  $30,985 at our Discount Price, or $29,995 at our Cash Discount Price.

Please call or email for more information..

This instrument cannot be purchased online at this time. Please call or email for more information, or submit a purchase inquiry now by clicking the button below. This item cannot be purchased online.
Please call or email us to arrange for purchase.

Additional Photos (click for expanded view)

28427 28428 28429
28430 28431 28432
28433 28434 28435
28436 28437 28438
28439 28440 28441
28442 28443 28444
28445 28446 28447
28448 28449 28450
28451 28452 28453
28454 28455 28675
28676 28677